← Sweden
Döda fallet
Visit Sweden, CC BY 4.0
ParkUnclaimed

Döda fallet

Geopark Indalsälven Döda fallet

Visible effects of the wearing power of water On 6 June 1796, Magnus Huss tried to divert the water past the Storforsen waterfall. It did not go as planned, and Ragundasjön upstream was drained in just a few hours. What remained was a dead waterfall, Döda fallet, and an approximately 800-metre-long dry river channel, a canyon. Döda fallet is the geopark's hub. Here there is a restaurant, a visitor centre, wide wooden ramps, paved gravel surfaces, a nature trail and picnic areas.

Remmen Storforsen had long been a problem. For the forest owners who lived upstream of the waterfall, the problem was that timber could not be floated down to the sawmills on the coast. The timber was broken apart in the 30-metre-high fall and turned into pulpwood. Another problem was that the salmon in the river could not make their way up the fall, so fish could only be caught downstream. There was also a desire to create a waterway from the Baltic Sea to Storsjön.

Magnus Huss – also known as Vildhussen – was hired to solve the problems by digging a canal past Storforsen. He began digging the canal in a ridge called Remmen (see map). Remmen was 65 m high and 300 m wide and lay across the present-day valley. Upstream, the ridge bordered the shore of Ragundasjön at Sandviken.

What Vildhussen did not know was that the ridge did not consist only of sand and gravel. The soil type silt was also present here. When silt becomes saturated, it loses all stability and becomes as loose as porridge. What Huss also did not know was that Remmen rested on a deep ravine, an older river channel. He had thought they would need to blast away a piece of rock to get the water to flow through the channel.

On the night of 6 June 1796, the ridge burst and the entire Ragundasjön was drained in a few hours. Storforsen became Döda fallet and the Indalsälven got a new channel. The ridge was washed away and a completely new landscape was created.

Lokängarna Where the Indalsälven now flows, the fertile Lokängarna meadows once lay. Here the farmers of Västerede had their hay meadows.

When Ragundasjön was drained, the rushing water washed away the meadowland. What remained was covered with gravel, sand and silt that the water carried with it. The result was dry, nutrient-poor soil. Nowadays mostly pine grows here. In the disaster, 16 hay barns were also lost. The same thing happened further downstream. Barns, jetties, sawmills, mills and fishing spots were carried away with the water. The damage the disaster caused was enormous.

The river channel The most prominent feature in the Döda fallet area is the largely bare river channel. Here Storforsen surged before Ragundasjön disappeared. At that time the lake had had its outlet here for over 7,000 years. Because large parts of the area are dry, you can see the effects of the flowing water's power, the most erosive process in the world. Here there are polished rock slabs, large boulders, plunge pools and not least giant's kettles. In the river channel, enormous masses of the ice sheet's meltwater also surged forward for many years and wore down the bedrock.

The boulder field Flowing water has carried away all finer material such as sand and gravel from the area. What remains in the river channel are the large boulders that the water could not transport away. Not even the powerful currents of Storforsen could move them.

In 2020, researchers discovered a previously unknown process that may explain the formation of such a large boulder field as you can see here. If you are interested, you can read more here: Newly discovered process behind ice-age landforms.

Giant's kettles In the dry river channel at Döda fallet there are several shallow hollows in the bedrock. Some are small and others large. Some are deep and others shallow. The hollows are called giant's kettles. They were formed by flowing water hollowing out the bedrock. Small stones, gravel and sand swirled around in the water vortices for a long time and bored out the holes in the rock. At the same time the giant's kettle was polished so it became smooth and fine. In some kettles lies a smooth, egg-shaped stone, called a runner stone. People used to believe that giants used the hollows to cook in. That is why they are called giant's kettles.

Plunge pools Below what was the Storforsen waterfall you see something that looks like large, round basins. These are plunge pools, or kettle basins as they are also called. It was here that the waterfall landed with full force and gouged out the bedrock. As the rock wall in the waterfall was worn down, the waterfall slowly moved upstream. New plunge pools were then formed. That is why you can see several plunge pools at varying distances from the edge of the waterfall.

Lintjärn It was at Lintjärn that the canyon began to take shape over 7,000 years ago. It was here that the rapid was born that would later become Storforsen 800 m upstream. The rapid slowly worked its way backwards through the bedrock. The flowing water wore down the rock so that steep, vertical walls formed in the channel. Here the bedrock has plenty of fractures. This made it easier for the water to create vortices which, together with gravel and sand, polished down the rock. In winter, at low water levels, water that collected in the fractures could freeze into ice and break loose more stone. All of this together has shaped the canyon.

The canyon Ragundasjön was formed 7,600 years ago when land uplift raised the rock sill at Döda fallet so much that the lake was cut off from Ragundafjorden, which was then part of the Baltic Sea. The lake's outlet was at that rock sill, and here a waterfall formed that grew ever larger as land uplift continued. The water's power to break down the bedrock depends on many different things. For example, erosion is affected by the amount of sand, gravel and stone carried along in the current, the slope of the ground and how hard the bedrock is. Canyons are unusual in Sweden because our bedrock is mostly hard and difficult to wear down.

Herkulesgruvan Herkulesgruvan is a mine shaft about 10 metres deep. What they hoped for was silver, but instead they found graphite. The mine dates from the mid-19th century but was never a success and was shut down fairly quickly. The reason was that the amount of mineral was far too small for further mining to be worthwhile. The rust-brown streaks in the rock are iron deposits.

The rock at the mine has begun to weather and several collapses have occurred. The mine is therefore closed to visitors for safety reasons.

  • Geopark Indalsälven AB C/o Ragunda kommun, 844 21 HAMMARSTRAND

Is this your business? Claim it to gain more visibility